Empire OL60TP Carol Rose Coastal Collection Outdoor 60″ Linear Fire Pit
Empire OL60TP Carol Rose Coastal Collection Outdoor 60″ Linear Fire Pit. This Fire Pit features a precisely ported stainless steel burner for consistent flame height and distribution, all concealed beneath a bed of crushed glass (Required sold separately). You light the burner with the push of a button and then set the valve to low, medium, or high. (Stainless steel burner and pan only table shown is not available)
This firepit can be mounted on any of these surfaces:
1. A raised frame of combustible material.
2. Brick, block, or stone base installation.
A sensor continuously monitors the flame and shuts off the gas if high wind or rain extinguishes the fire. When the clouds clear, you can relight the fire pit in seconds to continue the party. And after the last guest heads home, simply turn the knob to Off.
Even with no fire burning, your Fire Pit can chase away the darkness thanks to its built-in dual-strip multi-color LED lighting system (Model OL60TP18) mounted below the burner. Two intuitive buttons let you control the LED color and intensity. Or, set it to automatically cycle through all seven colors – at slow or moderate speed. For applications where electric power is not readily available, base model fire pits are available without lighting.
With all visible surfaces made from 11-gauge marine-grade 316 stainless steel, our Fire Pits are built to withstand years of exposure to harsh environments. Rainwater flows through the Fire Pit– either onto the ground or into the available drain tray (which routes the water away). Both the valve and lighting system are designed for years of outdoor use.
Our linear Fire Pits are available in OL48TP 48-inch (55,000 Btu) and 60-inch (65,000 Btu). Accessories include a drain tray (DT48LSS), four-sided tempered glass wind deflector (WG604LT), and a stainless steel weather cover (WC60LSS) that installs with or without the wind deflector in place.
LED-equipped systems (OL60TP18) require sufficient clear or translucent crushed glass to cover the burner and lighting system. Additional colors and shapes may be added as accents. Non-LED systems may use any color crushed glass. See installation manual for glass placement details.
Available in LP or Natural Gas.
- Manual Electronic Ignition with AA Battery
- 3-Stage Manually Variable Flame Height
- WG604LT Weather Deflector Glass Panels (Taller panel available for windy applications)
- BBA Stainless Steel Tilt-out Propane Tank Door
- BRB Stainless Steel Register Kit (2 registers, for island ventilation)
- DT48LSS Drain Tray, 48/60 Linear, Stainless Steel
- WC60LSS Weather Cover
• Crushed Glass (7 sq. ft.) (Glass Drops or Droplets may be added to area surrounding burner)
Ventless Fireplace for outdoor installation
Opening 13 11/16 x 58 7/8
Framing 31 H x 64 W x 22 1/2 D (see manual before framing)
If installation includes Propane tank storage under the firepit, use the optional BRB Vent Kit or refer to the Propane tank storage requirements