Empire LS24CD 24″ Driftwood Burncrete 10-pc Vent Free Gas Log Setwith Choice of valve
The Empire LS24CD 24″ Driftwood – Burncrete Vent Free Gas Log Set will transform the look of your fireplace. This Burncrete log set will glow magically in your fireplace. Each log is hand painted to make it look and feel exceptionally realistic as thou it were just brought in from outside.
This complete log system can be installed into any vent-free firebox or masonry fireplace to help add ambiance to your home design.
Our popular 24″ Slope Glaze Burners raise the standard for dancing flames. Internal ceramic beads tumble the gas to create exceptionally realistic flame movement. With eight log looks from which to choose.
From the curve of each log to the height of the stack, your White Mountain Hearth Log Set complements the burner pattern for a lifelike fire. Complete the illusion with one of our optional Ember Bed Kits (EK1) and Platinum Glowing Embers (PE20).
Your White Mountain Hearth Vent-Free log set creates a consistent, controlled heat – without dangerous flare-ups or chilling die-downs. These gas logs warm your room quickly and efficiently, while using about half the energy of a vented gas log.
The Driftwood – Burncrete is also available in 18″, and 30″
For use with the 24″ Vent-Free Slope Glaze Burners with four valve choices to choose from:
VFSM24 Vent-Free/Vented Slope Glaze Burner, Manual with 3-Position (Hi-Med-Low) Knob
VFSR24 Vent-Free/Vented Slope Glaze Burner, Millivolt valve with On/Off Switch
VFSE24 Vent-Free Slope Glaze Burner, Intermittent Pilot includes Thermostat Variable Remote Control
VFSV24 Vent-Free/Vented Slope Glaze Burner, Variable Flame with Remote Control for On/Off and Flame Height
- Up to 36,000 Btu
- Millivolt (VFSR), Manual (VFSM), Intermittent Pilot (VFSE includes remote), and Variable Flame (VFSV includes remote) models
- Burner Assembly
- Decorative Rocks (2 bags)
- Rock Wool (1 bag)
- Hardware Package
- Log Switch
A VFSE Burner may be installed in a vented fireplace (with the flue damper blocked open) for use as a decorative appliance. Replace the included Thermostat Remote with FRIP remote
A Vent-Free Burner may be installed in a vented fireplace (with the flue damper blocked open) for use as a decorative appliance. A decorative appliance operates with an on/off switch or remote, and may not operate with a thermostat. See owner’s manual for complete instructions.
Please check local or state codes to determine if Vent Free Heaters are permitted in your area before you purchase or install these log Sets as a Vent Free Appliance. If not permitted, you may install and operate these log sets as a Vented appliance.