Empire Heating Systems PVS35 UltraSaver 90 Plus Wall Furnace
HIGH-EFFICIENCY WALL FURNACE
Empire Heating Systems UltraSaver 90 Plus Wall Furnace zone heating generates its heat and draws its return air from the same room. This eliminates forced air movement into other rooms. You keep the warmth just where you want it.
Features and Benefits
Designed for efficiency and the perfect flow of warm air:
• 35,000 Btu (PVS35) or 17,500 Btu (PVS18) options
• Modern, cool-touch cabinet style fits your decor
• Whisper quiet operation
• Vents with low-cost, two-inch PVC,poly pipe, or UL636 listed pipe
• Works with most millivolt programmable thermostats
• No adjustment needed for high-altitude applications
• Natural gas or propane conversion kits available
• Fits easily inside a standard stud wall, no additional framing or clearances
UltraSaver 90
Innovative Technology
• Modulating Gas Valve – delivers the exact amount of gas required
• Two-Stage Heat Exchanger – creates progressively more heat
• Separate Multi-Speed Blowers – for venting and for air circulation
• Computer-Controlled Timing System – activates the circulation blower
• Power Venting – vents up to 50 feet away, vertically or horizontally
Easy to Operate
• Remote – operate the heater with an optional wall thermostat or hand-held remote
• Manual – heat continuously with five setting options
• Local – set the internal thermostat to maintain your desired room temperature
Comfort Just Where You Need It
• Sunrooms
• Basements
• Room Additions
• Vacation Homes and Cabins
• Multifamily Housing
• Lofts and Condominiums
• Updating from Wood, Oil, Electric, or Inefficient Gas Heaters
• Manufactured and Mobile Homes
Accessories
- Heated Humidification Tray PVSHT2 – Evaporates condensate as humidity back into the room
- External Condensate Pump Kit PVSEP1 – Pumps condensate away from heater instead of gravity drain
- Condensate Hose Extension PVSCT10 – 10 ft condensate drain extension
- Temperature Sensor Relocation Kit PVSRT1 – Room temperature Sensor Extension
- Deep Rear Shroud PVSDS1 – Allows venting to be run in front of the wall on floor installations only
- Wall Mount Shroud PVSWS1 – Allows installation of heater off of the floor
- Empire Heating Systems PVSA1 Air Pipe Kit – Converts single flue to direct-vent
- Empire Heating Systems PVSDV35A Vent Adaptor, DV35 to PVS(18/35), includes Transition Plate – for single vent installation
- Empire Heating Systems TDV1 Wall Thermostat, Digital, Wire
- Empire Heating Systems TMV Wall Thermostat – Reed Switch
Requires: Vents with low-cost, 2-in PVC or PolyPro venting. The UltraSaver is classified as a “Category IV” appliance, which requires special venting materials and installation procedures. Installations can be Conventional (one-pipe) and Direct Vent (two-pipe). Venting must be completed with 1-1/2 or 2 inch diameter pipe. In selecting a location for installation, it is necessary to provide adequate clearances for servicing and proper installation. All vent and combustion air pipes and fittings must be Schedule 40 PVC, ULC S636 and meet the ANSI/ASTM Standard D1785. Cement must conform to ASTM Standard D2564.
Mark K. (verified owner) –
Specialty heater that works great as an upgrade to any traditional space heater.