Empire Heating DVC55 Direct Vent Counterflow Wall Furnace
Empire Heating Systems DVC55 Direct Vent Counterflow Wall Furnace 55,000 Btu’s
$1,877.65 – $2,251.65
Empire Heating Systems DVC55 Direct Vent Counterflow Wall Furnace 55,000 Btu's
Empire Heating DVC55 Direct Vent Counterflow Wall Furnace using clean and cost-efficient comfort make the DVC35 (35,000 BTU's) and DVC55 (55,000 BTU's) the perfect heaters to heat larger areas economically. Delivering ample, room-filling warmth, each furnace is stylishly crafted and fits against an outside wall.
- 76% efficient A.F.U.E.
- Heat large areas using minimum floor space
- Venting Included
- Warm air exits at floor level ensuring even distribution
- Standing pilot or electronic ignition available
- Total Comfort for a Fraction of the Cost of Electric Heat
- Front Panels Remove Easily for Cleaning and Servicing
- Counterflow Blower Circulates Warm Air at Floor Level
- Matchless Push button Piezo Ignition
- Minimal use of floor space
Optional side outlets, automatic blowers, and thermostats available
DIRECT-VENT SYSTEMS Direct Vent systems mount along an outside wall and have a vent within-a-vent system to draw in outdoor air to support combustion and exhaust flue products to the outdoors. The vent cap usually installs on the outside wall of the home.
Because they do not draw your already-heated room air to support combustion, Direct Vent systems are among the most efficient of the vented heaters. Direct Vent systems may be installed as the primary heating system
Ideal for larger areas, DVC35 and DVC55 wall furnaces add comfort and beauty to any decor.
The standing pilot systems do not require electricity; operates in a power outage.
Venting Included: 6" (152mm) diameter air inlet tube and 4" (102mm) diameter flue outlet tube
DVC35 (35,000 Btu) DVC55 (55,000 Btu)
Note: SPP models are equipped with a standing pilot. IP models are equipped with electronic ignition.
The furnace is 14 1/8” (358mm) in width and can be recessed between standard 16” (406mm) on center wall stud.
The wall opening required for the vent is a diameter of 7 1/2” (191mm).
Made in USA
Additional information
| Weight | 123 lbs |
|---|
Specifications
| Model | DVC-55SPP | DVC-55IP |
| Input BTU | 55,000 | 55,000 |
| Height | 82 3/8″ | 82 3/8″ |
| Width | 16″ | 16″ |
| Depth | 11 1/2″ | 11 1/2″ |
| Shipping Weight, lb.. (Two Cartons) | 107 | 107 |
| Gas Inlet Iron Pipe Size (N.P.T.) | 1/2″ (13mm) | 1/2″ (13mm) |
| Vent Opening in Wall | 7 1/2” Dia. | 7 1/2” Dia. |
| CFM | 400 | 400 |
| Options for Above Furnaces | ||
| Wireless Remote Wall Thermostat | TRW Wireless Remote | TRW Wireless Remote |
| SOR-1 | Register, Side Outlet | Register, Side Outlet |
| SOK-1 | Side Outlet Kit, 10” (25.4cm) Boot Assembly with Register | Side Outlet Kit, 10” (25.4cm) Boot Assembly with Register |
| DV-822 | Vinyl Siding Vent Kit | Vinyl Siding Vent Kit |
| TMV | TMV Wall Thermostat – Reed Switch | TMV Wall Thermostat – Reed Switch |
Warranty
Warranty Terms
Limited Ten-Year Parts Warranty – Combustion Chamber
Limited Five-Year Parts Warranty – All Other Components (Except Remote Controls and Thermostats)
Limited One-Year Parts Warranty – Remote Controls and Thermostats
Limited Two-Year Labor Warranty – All Components (Except Remote Controls and Thermostats)
Refer to your Owner’s Manual for complete installation, warranty, and safety information.
You must be logged in to post a review.
Reviews
There are no reviews yet.