DuraVent Duratech 6DT-TSB 6″ Dia. Adjustable Tee Support Bracket galvalume


Brand: Duravent

Original price was: $200.07.Current price is: $180.06.

10% Off

Call 732-835-4267 For A Price Check!

Free Shipping on All Orders Over $99

Ships in 24-48 hours

100% Secure Online Shopping

Authorized Dealer

Call 732-835-4267 For A Price Check!

DuraVent Duratech 6DT-TSB 6″ Dia. Adjustable Tee Support Bracket galvalume

Duratech 6DT-TSB 6″ Dia. Adjustable Tee Support Bracket galvalume. Use as wall support for chimney system. Use of straps is optional. Supports up to 50’ of DuraTech Chimney without straps, and 70’ of DuraTech Chimney with straps. Attaches to chimney pipe. Can be installed above or below the Tee. If installed below the Tee, a short section of pipe is required. Adjustable base provides 2” to 6” clearance to wall.

Designed for appliances that are tested and listed for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. DuraTech: The optimum in safety and performance for an all-fuel chimney.

DuraTech features light weight insulation, twist-lock fittings, support boxes with factory installed starter sections, elbows with 360° swivel base, select black finish pipe lengths, five foot length pipe sections, and adjustable pipe lengths.

Designed for normal, continuous operation at 1000°F flue gas temperatures, DuraTech is subjected to rigorous and stringent high temperature requirements of the UL standard, including one hour at 1400°F, plus three ten-minute chimney fire test at 2100°F.


  • Limited Lifetime Warranty
  • UL Listed c-UL-us Listed to UL 103 HT and ULC S604 (MH7399)

Also available:

6DT-LB Locking Band

6DT-XRS 6″ & 8″ Extended Roof Bracket

6DT-RRS Roof Radiation Shield

6DT-CS24R Square Ceiling Support Box – 24″ (Reduced Clearance)

6DT-CS36IS Square Ceiling Support Box 36″ with Attic Insulation Shield

6DT-IS Attic Insulation Shield

6DT-FRS Firestop Radiation Shield

6DT-AP17x21 Transition Anchor Plate 17″ x 21″

6DT-AP17x17 Transition Anchor Plate 17″ x 17″

6DT-AP13x21 Transition Anchor Plate 13″ x 21″

6DT-AP14x17 Transition Anchor Plate 14″ x 17″

6DT-FC Finishing Collar/w adapter

6DT-FCS Flat Ceiling Support Box

6DT-XWS 6″ & 8″ Extended Wall Support

6DT-XWS-SS 6″ & 8″ Extended Wall Support – SS

6DT-AWSX 6″ & 8″ DT Extended Adj Wall Strap

6DT-AWSX-SS 6″ & 8″ DT Extended Adj Wall Strap SS

6DT-TSBSS Adjustable Tee Support Bracket – SS

6DT-STSS Standard Tee w/Cap SS

6DT-ST Standard Tee w/Cap GA

6DT-IWT Insulated Wall Thimble

6DT-WT Wall Thimble

6DT-RSTC12 Trim Collar for Roof Support 10/12 – 12/12

6DT-RSTC9 Trim Collar for Roof Support 7/12 – 9/12

6DT-RSTC6 Trim Collar for Roof Support 4/12 – 6/12

6DT-RSTC3 Trim Collar for Roof Support 0/12 – 3/12

Weight10.1 lbs


Duratech Install manual




M&G DuraVent, Inc. (“DuraVent”) provides this limited lifetime warranty for all of its products with the exception of Ventinox® (lifetime), and PolyPro® (ten years). Subject to the limitations set forth below, DuraVent warrants that its products will be free from defects in material or manufacturing, if properly installed, maintained and used. DuraVent products are fully warranted if installed only by a professional installer. See owners manual for full warranty.

You may also be interested in


There are no reviews yet

Only logged in customers who have purchased this product may leave a review.